HD LED P2 indoor display screen
- MSK
- Shenzhen
- 7-10 working days
- 10000 Square per month
Indoor P2 full-color LED display can support synchronous control card and asynchronous control card at the same time; even when the control computer fails, it can still display normally.
In terms of format, the indoor P2 display can be freely arranged by the user; it can display text, pictures, charts, images, animations, and video information; and the amount of information displayed is not limited.
The production of P2LED indoor display screen adopts non-linear correction technology, the image effect is delicate and clear: the animation effect is vivid and diverse: the video effect is smooth, lifelike, no bright spots, no blooming screen, no dead spots, high brightness, low light decay, long life, quality it is good.
The indoor P2 full-color display with high resolution really can perfectly express the high-definition picture quality and delicate colors, which is comparable to LCD to a certain extent.
P2 indoor full-color display mid-to-high-end configuration, stable performance, good flatness, seamless stitching.
1. Module Parameters
A. Lamp parameters
Lamp Bead | Copper wire：XP2BC | ||
Pixel Composition | 1R1G1B | ||
Chip Package | SMD1515 | ||
Base color | Test Conditions | Voltage | Wavelength range |
Red light | 8mA | 1.8-2.3V | 619-624nm |
Green light | 5mA | 2.5-3.1V | 524-528nm |
Bule light | 3mA | 2.5-3.1V | 470-474nm |
Base color | Test Conditions | Voltage | Brightness range |
Red light | 8mA | 1.8-2.3V | 32.5-42.3mcd |
Green light | 5mA | 2.5-3.1V | 140-182mcd |
Bule light | 3mA | 2.5-3.1V | 19.1-24.8mcd |
Remark | The wavelength and brightness of the die are typical values | ||
B. Module
Module size | 256mm*128mm*15mm |
Resolution | 128*64=8192 |
Dot Pitch | 2mm |
Physical density | 250000 pixel /㎡ |
Module current | 2.2A±0.1A |
Input voltage | 4.8V-5.2V |
Module power | ≤11W |
Module weight | 234g |
C. Screen parameters
Dot density | 250000 pixel / m² |
Brightness | ≥500cd/ m²(Adjustable) |
Viewing angle | 120 ° horizontal / 120 ° vertical |
Flatness | ≥97% |
Color uniformity | ±0.003 Cx,Cy -within |
Highest contrast | 3000:1 |
Protection level | Back: IP43 Front: IP43 |
Maintenance method | Maintenance from behind |
D. System Control Parameters
Signal color bits | Red, green, blue each ≥8bit |
Driving method | Constant current drive |
Frame rate | 60 frames High brush supports 3D: 120 frames |
Refresh rate | Normal brush ≤1920HZ High brush ≤3840Hz |
Color temperature | 3200K～9500K Adjustable |
Bright adjustment | Manual / Automatic / Program control |
Pixel correction | Equipped with brightness and chroma point-by-point correction |
Control method | Synchronization control |
Control distance | Category 5 twisted-pair network cable, over 100 meters using optical fiber transmission |
Software interface | Windows XP /7/8/10 |
Signal input | HDMI、DVI |
E. Screen operating parameters
Operating Voltage | AC：110V~240V、50~60Hz |
Peak power | ≤336W/ m² |
Average power | 112W/ m²～168W/ m² |
Working time | ≥7×24hrs，Support continuous uninterrupted display |
MTBF | ≥10000H |
Lamp life | 100,000 hours |
Discrete runaway points | ≤0.0001, 0 when leaving the factory |
Continuous runaway point | 0 |
Blind spot rate | ≤0.0001, 0 when leaving the factory |
Operating temperature | -10℃～60℃ |
Operating humidity | 10％～90％RH，Non-condensing |
2. Power parameters
Power Parameters | |||
Power | Current | Weight | Number of loadable modules |
200W | 2.2A | 1.05kg pcs | 4pcs |
schematic diagram | Description | ||
| A 200W power supply carries 4 modules, and a one-to-two power cable can carry 2 modules. A total of 2 power cables are used. | ||
