HD P1.56 indoor led display screen
- MSK
- Shenzhen
- 7-10 working days
- 10000 Square per month
Indoor P1.56 full-color LED display can support synchronous control card and asynchronous control card at the same time; even when the control computer fails, it can still display normally.
In terms of format, the indoor P1.56 display can be freely arranged by the user; it can display text, pictures, charts, images, animations, and video information; and the amount of information displayed is not limited.
The production of P1.56LED indoor display screen adopts non-linear correction technology, the image effect is delicate and clear: the animation effect is vivid and diverse: the video effect is smooth, lifelike, no bright spots, no blooming screen, no dead spots, high brightness, low light decay, long life, quality it is good.
The indoor P1.56 full-color display with high resolution really can perfectly express the high-definition picture quality and delicate colors, which is comparable to LCD to a certain extent.
P1.56 indoor full-color display mid-to-high-end configuration, stable performance, good flatness, seamless stitching.
1. Module Parameters
A. Lamp parameters
Lamp Bead | Copper wire：XP1.56BC | ||
Pixel Composition | 1R1G1B | ||
Chip Package | SMD1010 | ||
Base color | Test Conditions | Voltage | Wavelength range |
Red light | 8mA | 1.8-2.2V | 618-623nm |
Green light | 5mA | 2.8-3.2V | 524-529nm |
Bule light | 3mA | 2.8-3.2V | 465-470nm |
Base color | Test Conditions | Voltage | Brightness range |
Red light | 8mA | 1.8-2.2V | 19-26mcd |
Green light | 5mA | 2.8-3.2V | 52-70mcd |
Bule light | 3mA | 2.8-3.2V | 12-16mcd |
Remark | The wavelength and brightness of the die are typical values | ||
B. Module
Module size | 200mm*150mm*15mm |
Resolution | 128*96=12288 |
Dot Pitch | 1.56mm |
Physical density | 409600 pixel /㎡ |
Module current | 3.2A±0.1A |
Input voltage | 4.8V-5.2V |
Module power | ≤21W |
Module weight | 440g |
C. Screen parameters
Dot density | 409600 pixel / m² |
Brightness | ≥600cd/ m²(Adjustable) |
Viewing angle | horizontal 160°/ vertical 160° |
Flatness | ≥97% |
Color uniformity | ±0.003 Cx,Cy within |
Highest contrast | 3000:1 |
Protection level | Back: IP43 Front: IP43 |
Maintenance method | Maintenance from behind |
D. System Control Parameters
Signal color bits | Red, green, blue each ≥8bit |
Driving method | Constant current drive |
Frame rate | 60 frames High brush supports 3D: 120 frames |
Refresh rate | Normal brush ≤1920HZ High brush ≤3840Hz |
Color temperature | 3200K～9500K Adjustable |
Bright adjustment | Manual / Automatic / Program control |
Pixel correction | Equipped with brightness and chroma point-by-point correction |
Control method | Synchronization control |
Control distance | Category 5 twisted-pair network cable, over 100 meters using optical fiber transmission |
Software interface | Windows XP /7/8/10 |
Signal input | HDMI、DVI |
E. Screen operating parameters
Operating Voltage | AC：110V~240V、50~60Hz |
Peak power | ≤556W/ m² |
Average power | 187W/ m²～373W/ m² |
Working time | ≥7×24hrs，Support continuous uninterrupted display |
MTBF | ≥10000H |
Lamp life | 100,000 hours |
Discrete runaway points | ≤0.0001, 0 when leaving the factory |
Continuous runaway point | 0 |
Blind spot rate | ≤0.0001, 0 when leaving the factory |
Operating temperature | -10℃～60℃ |
Operating humidity | 10％～90％RH，Non-condensing |
2. Power parameters
Power Parameters | |||
Power | Current | Weight | Number of loadable modules |
200W | 2.2A | 1.05kg pcs | 4pcs |
schematic diagram | Description | ||
| A 200W power supply carries 4 modules, and a one-to-two power cable can carry 2 modules. A total of 2 power cables are used. | ||
